Impresora Panasonic Kx-p1150 Manual

Adjustment (Head Gap Lever) A c H E A D G A P V c + Single Sheet Position (Paper Feed Selector) □ 0.45 mm Gauge^,^^ n (does not pass) 0.40 mm Gauge ^ n (does pass) 5.1 Head Gap 1. Set the head gap lever to the single sheet position. Set the paper feed selector to the position. Ensure the printhead is firmly secured with 2 screws. Move the carriage to the left side and adjust the head gap between the platen and the printhead for a clearance of 0.35mm-0.4mm by turning the left eccentric cam. Move the carriage to the right side and adjust the gap as per step 4 above by turning the right eccentric cam. Note: The projection on the eccentric cam is released from the adjustment hole by pulling the knob.

Turning the eccentric cam one step causes 0. Half Life 2 Steam. 037mm ± 0.052mm head movement. Note: Use only a round wire feeler gauge of the specified dimension for this adjustment. Note: The head gap adjustment is required when replacing the head, platen, carriage, carriage shaft or eccentric cams. Note: Moving the head gap lever towards the® position increases the head gap clearance, and moving toward the(2)position decreases the clearance.

User manual for the device Panasonic KX-P1150. Rune Halls Of Valhalla Iso on this page. Online user manual database. Office Manuals and free pdf instructions. Find the office and computer equipment manual you need at ManualsOnline.